Flexi Forklift Training Intro

First thing, put the Flexi truck into gear.

Release the handbrake and slowly move forwards looking in the direction of travel and looking out for your pivot point which is centre of the front wheel.

Once in position, stop the Flexi truck, put it into neutral, turn the wheel completely to the left.

Put it back into the gear, looking all around in your all round checks, moving slowly forward aligning the forks stopping six inches away from the racking.

Apply the handbrake and putting the Bendi truck into neutral and using the hydraulics, take the tilt off.

Now raise the forks up to eye level.

Once the forks are in position, move forward again entering the pallet nice and smoothly.

Turn the steering as you're entering the pallet entering nice and slow, keep on going forwards entering the pallet turning the wheel as you are manoeuvring.

Kissing just up to the pallet applying the handbrake again and putting it into neutral.

Raise the forks up lifting the pallet off two inches off the racking

Next, reverse the Bendi forklift truck. Again into gear having a look around releasing the handbrake looking in the direction of travel but also needing to look at the load that's coming out.

Handbrake on again into neutral, lower the load down.

Apply back tilt to secure the load.

Next, reverse back to your starting position. Into gear again having a look around releasing the handbrake straightening the steering before we manoeuvre so the truck is nice and straight.

Apply handbrake and into neutral.