From 00:00

Intro

From 00:19

Adjusting the spring

From 00:56

Adding more tension to the spring

From 00:33

Place pin end bracket into location on left and mark fitting holes

From 00:40

Fix with no6 wood screws supplied for frame, or masonry plugs for wall

From 00:51

Present blind and bracket into position repeat bradet foxing process

From 01:06

Blind needs to be level and square so mechanism works properly

From 01:13

Repeat the fixing process for bracket A

From 02:02

Use flat end screwdriver in right end of blind

From 02:21

Put blind into position bracket A first, then push B pin in

From 02:31

If the blind rises too slow or fast, increase/reduce the tension

From 02:54

To decrease, remove blind, unroll by hand to about 45cm, reposition

From 03:11

Alow it to rise slightly until spring catches and locks