From 00:19

LET'S FIX THE SUPPORT USING PLASTIX

From 00:51

Sand with grit #120

From 01:44

Sand and clean the other side

From 02:17

Set the support and spot weld with the Activator

From 02:48

Place a piece of Adhesive Mesh on the support and the headlight to make a Reinforcement bridge

From 03:14

Apply "IRF" over the mesh Instantaneous Reaction Fiber K

From 03:36

Apply Activator until the IRF is saturated

From 04:13

Apply IRF and Activator

From 05:19

Reinforce with the Mesh the back part of the support

From 06:41

Sand excesses to paint

From 00:27

Options for mounting the light bar

From 01:41

Measuring the distance between the holes

From 04:55

Testing the light bar

From 07:27

Installing fender washers

From 08:34

Trimming the brackets

From 11:19

Wiring

From 13:54

Fabricating the custom bracket

From 15:59

Fabricating the aluminum bracket

From 16:57

Installing the custom bracket

From 18:24

Outro

From 00:01

Introduction

From 00:37

Removing the old headlamp mounting bolts

From 03:00

Attaching the metal plate

From 03:29

Marking the metal plate

From 04:35

Drilling a hole in the plate

From 05:02

Marking and drilling the mounting plate

From 05:33

Marking the mounting plate

From 05:43

Fitting the repair plate

From 06:28

Fitting the new headlamp mounting bracket

From 08:53

Conclusion