From 00:08

Malfunction: Control Does Not Power Up. LED's are off.

From 00:20

Applying 380VAC, 3 phase to L1, L2, L3

From 00:39

Turning off the 380VAC, 3phase.

From 01:11

Use screw drivers to unclip the plastic cover from the metal heatsink assembly.

From 02:17

Clamp your drive in a vice. So that we can pry the heatsink away from the power devices.

From 02:55

Now with a good pair of pliers, bend the wall of the heatsink assembly away from the power devices.

From 03:12

Now you can remove the power board. The frame ground straps are tough to slide out though.

From 10:36

Now let us remove the electrolytic capacitors.

From 24:30

The new electrolyte capacitors have been installed.

From 25:46

Applying 380VAC, 3phase to L1, L2, L3