From 00:03

$34 with 20% off coupon Harden Freight 7 inch 10 amp variable speed polisher Item #69474

From 00:33

This is a 4 Velcro backer pad Screw it on the polisher

From 00:58

This colorful backing is made of velcro and attaches to the backing pad on the polisher

From 01:20

Start with the most abrasive pad, which is the 50 grit. Press with light to moderate pressure.

From 01:36

Move the polisher over the edges and corners to "ease" them which makes them less sharp and angular.

From 03:02

I ran a trickle of water on the slab to provide a continuous stream of water, similar to an industrial polisher.

From 03:41

If you're working with Granite or Marble, dry the slab, and apply a "Granite Sealer" (available at Home Depot for $14). These natural stones are slightly porous, and will pickup stains more easily if not sealed.

From 04:06

Use the 50 grit pad to eliminate the rough spots, and fine tune the shape of the bullnose.

From 05:08

1500 Grit with water.

From 06:34

This is the completed bullnose