From 00:13

Pull the cutter to the right until the chip slot of chip collector can be seen.

From 00:16

Make sure the chip collector's chip slot fits in the OEM cartridge's chip slot.

From 00:20

Turn the handle clockwise until the chip is removed from the chip slot by the cutter

From 00:37

Turn the handle anticlockwise and take out the chip by tweezer.

From 00:45

Remove excess around the chip

From 00:52

Make sure the chip is placed along the right direction.

From 00:57

Press the top edge of the chip againest the top edge of the slot.

From 01:04

Make sure the chip is pushed to the right and no gap left.

From 01:10

Remove the sealing tape

From 01:19

Close up the machine cover.

From 00:23

Cut the plasitic components to remove the chip from OEM's product

From 00:30

Insert the chip into the slot. Make sure the chip reaches the end of the chip slot

From 00:35

Check the T-shape groove, and make sure the chip is installed in a correct position just as shown.

From 00:49

Find the position of the chip in OEM's product

From 00:52

Push the tailor-made tool in the bottom of the chip slot

From 01:15

Use the tweezers to remove the tilted chip

From 01:23

Clean the chip with the metal blade

From 01:26

Refer to the picture pasted on the toner, and insert the chip in the same position